SikaWall®-126 Plaster Mix KH

Plaster and Brick Adhesive

SikaWall®-126 Plaster Mix KH
SikaWall®-126 Plaster Mix KH
SikaWall®-126 Plaster Mix KH

SikaWall®-126 Plaster Mix is a one component, prepacked polymer modified mortar combining cement with selected grades of sand and several admixtures; used as light brick plaster, red brick plaster, and red brick adhesive.

  • Multifunctional (plaster, red brick adhesive, all types of brick adhesive)
  • Excellent adhesion.
  • Easy to use, just add water.
  • Reduce crack from plaster’s expansion and shrinkage.
  • Faster working process. Safe time.
Product Data Sheet Show all documents

Overview

Usage

  • Can be used as plaster mortar on various surface such as light brick and red brick surface.
  • For concrete surface, it must be treated with bonding agent (e.g. Sika Latex® or SikaCim Latex®). Apply SikaWall 126 Plaster Mix while the bonding agent is still wet.
  • For non-exposed application
 

Advantages

  • Multifunctional (plaster, red brick adhesive, all types of brick adhesive)
  • Excellent adhesion.
  • Easy to use, just add water.
  • Reduce crack from plaster’s expansion and shrinkage.
  • Faster working process. Safe time.

Packaging

25 kg bag

Colour

Powder / Grey

Product Details

Shelf life

9 months from date of production if stored properly in original, unopened and undamaged sealed packaging.

Storage conditions

Store in dry conditions at temperatures between +5°C and +30°C

Density

~1.65 kg/L

Compressive strength

28 days                                               ~6 N/mm2                    (ASTM C-109)

Tensile strength

28 days                                               ~0.3 N/mm2                 (BS EN 1015-12)

 

Application

Mixing ratio

Water : SikaWall®-126 Plaster Mix 3.2 - 3.5 L : 25 kg (by weight)

Layer thickness

For red brick laying:~ 10 mm (max. thickness 15mm)

For plastering:~ min 5 mm (max. thickness 15 mm)

Ambient air temperature

+8 °C to +40 °C

Pot Life

~1 hours (at +30 °C)

Waiting time to overcoating

As brick adhesive before plaster - after 24 h*

As plaster before skim coat - after 7 d*

*Note : Times are approximate and will be effected by changing ambient conditions particulary temperature and relative humidity. Low temperature and high relative humidity retard curing, while high temperature and low relative air humidity accelerate curing progression.

Consumption

Red Brick adhesive

~0.78 m2 per 25 kg bag (based on 10 mm thickness)*

Plaster:

~2.5 m2 per 25 kg bag (based on 5 mm thickness)*

*depend on substrate surface profile and layer thickenss

MIXING

  • Pour 3.2 - 3.5 Litre of water into mixing vessel then add SikaWall®-126 Plaster Mix slowly and mix properly
  • Mixing time is ~3 minutes. A slow speed mixer is recommended (300 - 600 rpm)
 

APPLICATION

As Brick Adhesive

  • Apply with scoop then fix the brick. Proceed to apply while SikaWall®-126 Plaster Mix is still wet. 
  • Waiting time before plaster application minimum 24 hours. To get the best result use SikaWall®-126 Plaster Mix

As Plaster 

  • Apply with flat trowel.
  • Waiting time before skim coat application minimum 7 days. To get the best result use SikaWall® Skim Coat.

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.

Documents